S&W Shield 2.0 9MM EZ For Sale -Smith & Wesson, M&P9 SHIELD EZ M2.0, Semi-automatic Pistol, Internal Hammer Fired, Compact, 9MM, 3.675″ Barrel, Polymer Frame, Black Finish, 3-Dot Sights, Grip Safety, 8Rd, 2 Magazines
|UPC||REDACTED16||Manufacturer||Smith & Wesson|
|Manufacturer Part #||12437||Model||Shield M2.0|
|Accessories||2 Mags||Sights||3 Dot|
|Subcategory||Pistols – Polymer Frame|
How to clean the Smith & Wesson M&P Shield 9mm EZ Pistol
Clean barrel and guide rod
You can clean the inside of the barrel in one of two ways:
1. Run a Boresnake through the barrel several times. For extremely dirty barrels, apply some Hoppes No. 9 solvent to the inside of the barrel with Q-tips and let it sit for a few minutes before running the boresnake through.smith and wesson m&p 9mm for sale
2. Using a pistol rod and cloth patches. Wet the patches with Hoppes No. 9 gun cleaning solvent or equivalent and using the rod, push wet patches through the barrel until they come out clean. Depending on how dirty the barrel is, you may need a lot of patches.
Clean the feed ramp of the barrel with Hoppes No. 9 solvent. Be sure the barrel and feed ramp are nice and clean.
Use Hoppes Number 9 solvent & a rag or spray with Birchwood Gun Scrubber to clean the recoil spring and guide rod assembly. Wipe any remaining solvent off with a micro fiber cloth or paper towel.
Clean the gun frame
Use Hoppes #9 solvent and a paper towel or cotton swabs to clean all surfaces of the frame, especially the rails where the slide contacts the frame. On the M&P Shield and other guns that have a polymer (plastic) frame, do not get Hoppes No. 9 solvent on parts that are not metal.
The fastest, most thorough way to clean a polymer frame is to spray it down with Birchwood Casey Synthetic-Safe Gun Scrubber or equivalent. After using either cleaner, use a micro fiber cloth or rag to wipe any excess solvent off of the frame.
Clean the Slide
Use Hoppes No. 9 solvent and a cotton swab or paper towel to clean all surfaces on the inside of the slide, especially the areas that contact the frame rails during operation.
Wipe the slide down to remove the dirt and solvent.
Once all the parts are clean, we need to lubricate the moving parts with Original gun Oil or other quality gun lubricant.